C#またはC++でUSBデバイスディスクリプタ(デバイスはハードドライブではなく、ヘッドセットのような外部デバイス)から製品文字列を取得するにはどうすればよいですか?私は "私のヘッドセット"の文字列を取得する必要があります。USBデバイスの製品文字列を取得する(C#/ C++)
======================== USB Device ========================
+++++++++++++++++ Device Information ++++++++++++++++++
Device Description : USB Composite Device
Device Path : \\?\usb#vid_2ae2&pid_1388#abcdef#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Device ID : USB\VID_2AE2&PID_1388\ABCDEF
Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0018 (GUID_DEVCLASS_USB)
Driver : C:\Windows\System32\drivers\usbccgp.sys (Version: 6.3.9600.17238 Date: 2014-07-24)
Driver Inf : C:\Windows\inf\usb.inf
Legacy BusType : PNPBus
Class : USB
Service : usbccgp
Enumerator : USB
Location Info : Port_#0006.Hub_#0003
Location IDs : PCIROOT(0)#PCI(1400)#USBROOT(0)#USB(6), ACPI(_SB_)#ACPI(PCI0)#ACPI(XHC_)#ACPI(RHUB)#ACPI(HS06)
Container ID : {acb9ebb8-b976-57c5-b90d-5ecc5e96e487}
Manufacturer Info : (Standard USB Host Controller)
Capabilities : 0x94 (Removable, UniqueID, SurpriseRemovalOK)
Address : 6
Problem Code : 0
Power State : D0 (supported: D0, D3, wake from D0)
Child Device 1 : USB Input Device
Device ID : USB\VID_2AE2&PID_1388&MI_03\6&12E75DA&0&0003
Class : HIDClass
Child Device 1 : HID-compliant consumer control device
Device ID : HID\VID_2AE2&PID_1388&MI_03\7&178A021A&0&0000
Class : HIDClass
Child Device 2 : USB Audio Device
Device ID : USB\VID_2AE2&PID_1388&MI_00\6&12E75DA&0&0000
Class : MEDIA
Child Device 1 : Audio Endpoint
Device ID : SWD\MMDEVAPI\{0.0.1.00000000}.{0B0B6598-290C-495B-A4E1-D6A633F61574}
Class : AudioEndpoint
Child Device 2 : Audio Endpoint
Device ID : SWD\MMDEVAPI\{0.0.0.00000000}.{E3ADC851-586E-4FF8-BBF3-0EBF7E72FBDA}
Class : AudioEndpoint
------------------ Device Descriptor ------------------
bLength : 0x12 (18 bytes)
bDescriptorType : 0x01 (Device Descriptor)
bcdUSB : 0x200 (USB Version 2.00)
bDeviceClass : 0x00 (defined by the interface descriptors)
bDeviceSubClass : 0x00
bDeviceProtocol : 0x00
bMaxPacketSize0 : 0x40 (64 bytes)
idVendor : 0x2AE2
idProduct : 0x1388
bcdDevice : 0x1393
iManufacturer : 0x00 (No String Descriptor)
iProduct : 0x02 (String Descriptor 2)
Language 0x0409 : "My Headset"
iSerialNumber : 0x03 (String Descriptor 3)
Language 0x0409 : "ABCDEF"
bNumConfigurations : 0x01
は現在、私は、製品の文字列を取得するには、このコードサンプルを使用し、私はハブを開いて、このハブに接続されている私のデバイスの製品文字列を取得するためにIOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTIONでのDeviceIoControlを呼び出しますが、このコードは時々ハブので、随時作品他の誰かによって開かれたとのCreateFileは(hubPath ...)失敗している:
// Open Hub
IntPtr handle = CreateFile(hubPath, FileAccess.ReadWrite, FileShare.ReadWrite,
IntPtr.Zero, FileMode.Open, FileAttributes.Normal, IntPtr.Zero);
if (handle.ToInt32() != INVALID_HANDLE_VALUE)
{
// 1. Load connection properties to get Device descriptor indexes
LogWriter.Debug("checking device, load hub connection properties...");
USB_NODE_CONNECTION_INFORMATION_EX connectionInfo = new USB_NODE_CONNECTION_INFORMATION_EX();
connectionInfo.ConnectionIndex = port;
// memset
string NullString = new string((char)0, nBytes/Marshal.SystemDefaultCharSize);
IntPtr connectionInfoBuffer = Marshal.StringToHGlobalAuto(NullString);
Marshal.StructureToPtr(connectionInfo, connectionInfoBuffer, true);
int iProductIndex = -1;
int ioBytes = Marshal.SizeOf(connectionInfo);
int nBytesReturned = 0;
if (DeviceIoControl(handle,
IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX,
connectionInfoBuffer,
ioBytes,
connectionInfoBuffer,
ioBytes,
out nBytesReturned,
IntPtr.Zero) != 0)
{
LogWriter.Debug("checking device, hub connection properties loaded");
USB_NODE_CONNECTION_INFORMATION_EX nodeConnection = (USB_NODE_CONNECTION_INFORMATION_EX)Marshal.PtrToStructure(connectionInfoBuffer, typeof(USB_NODE_CONNECTION_INFORMATION_EX));
if (nodeConnection.DeviceIsHub == 0)
{
iProductIndex = nodeConnection.DeviceDescriptor.iProduct;
LogWriter.Debug(String.Format("GetDeviceProperties() Checking device, iProductIndex = {0}", iProductIndex));
}
}
else
{
CheckError("DeviceIoControl");
}
// 2. Load iProduct descriptor
USB_DESCRIPTOR_REQUEST stringDescReq = new USB_DESCRIPTOR_REQUEST();
int bufSize = Marshal.SizeOf(stringDescReq) + MAXIMUM_USB_STRING_LENGTH;
stringDescReq.ConnectionIndex = port;
stringDescReq.SetupPacket.wValue = (short)((USB_STRING_DESCRIPTOR_TYPE << 8) | iProductIndex);
stringDescReq.SetupPacket.wIndex = 1033; // Language code
stringDescReq.SetupPacket.wLength = (short)(bufSize - Marshal.SizeOf(stringDescReq));
// типа memset
IntPtr ptrRequest = Marshal.StringToHGlobalAuto(NullString);
Marshal.StructureToPtr(stringDescReq, ptrRequest, true);
int nBytesRet = 0;
LogWriter.Debug(String.Format("checking device, load USB descriptor({0}, {1}, {2})",
stringDescReq.SetupPacket.wValue,
stringDescReq.SetupPacket.wIndex,
stringDescReq.SetupPacket.wLength));
if (DeviceIoControl(handle,
IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION,
ptrRequest,
bufSize,
ptrRequest,
bufSize,
out nBytesRet,
IntPtr.Zero) != 0)
{
int ptrSize = ptrRequest.ToInt32();
LogWriter.Debug(String.Format("checking device, USB descriptor loaded({0}, {1})",
ptrSize,
Marshal.SizeOf(stringDescReq)));
IntPtr ptrStringDesc = new IntPtr(ptrSize + Marshal.SizeOf(stringDescReq));
USB_STRING_DESCRIPTOR StringDesc = (USB_STRING_DESCRIPTOR)Marshal.PtrToStructure(ptrStringDesc, typeof(USB_STRING_DESCRIPTOR));
prop.ProductName = StringDesc.bString;
if (prop.ProductName != null)
{
LogWriter.Debug("ProductName = " + prop.ProductName);
}
}
else
{
LogWriter.Warn("DeviceIoControl failed");
CheckError("DeviceIoControl");
}
CloseHandle(handle);
}
だから私は安定動作する製品の文字列を取得するための他の方法が必要です。
メモ:現在のデバイスはHIDなので、HIDの機能を使用することはできますが、私はHID以外のUSBデバイスも持っています。ソリューションがHIDとHID以外のデバイス時間。私は年前にHidD_GetProductStringルーチンを試しましたが、空のバッファが返ってきたことを覚えています(HIDに子デバイスがあり、問題が正しいデバイスパスを取得する方法であるため、デバイスパスが正しくない可能性があります)。
は'失敗:あなたはHidLibraryを使用して、そして
HidDevice _device
を持っている場合は、(メーカーが同じように動作します)、このような製品の文字列を取得することができますハブに直接照会することはできません。そのような単純な。情報がレジストリのような別の場所で利用できない場合は、運が悪いです。 –これを見てください:http://stackoverflow.com/questions/3331043/get-list-of-connected-usb-devices – Gusman
私はWMIを試みましたが、usb製品の文字列を返しませんでした。クラスがあります)。 – Evgeniy